Hulo

Potential Energy, Work & Stability

Official-book style notes on potential energy, conservative vs non-conservative forces, the work–energy theorem, equilibrium types (stable, unstable, neutral), and small-oscillation analysis near minima of U leading to SHM with ω = √(k/m).

2025-01-22 • 15 min read

📘 Physics Mechanics Notes: Potential Energy, Work, and Stability


🔹 Potential Energy (UU)

Potential energy represents the stored energy of a system due to its position or configuration in a force field.

  • For a particle under a force F\mathbf{F}:

    F=−∇U\mathbf{F} = - \nabla U

    This means the force points in the direction of decreasing potential energy.

Examples:

  • Gravitational potential energy: U=mghU = mgh
  • Elastic spring energy: U=12kx2U = \tfrac{1}{2}kx^2

🔹 Conservative vs. Non-Conservative Forces

✅ Conservative Forces

  • Work done is path independent, depends only on initial and final positions.
  • Work done around a closed loop = 0.
  • Examples: Gravity, spring force, electrostatic force.

Mathematically:

∮F⋅dr=0⇒F=−∇U\oint \mathbf{F}\cdot d\mathbf{r} = 0 \quad \Rightarrow \quad \mathbf{F} = -\nabla U

❌ Non-Conservative Forces

  • Work done is path dependent.
  • Energy is dissipated (e.g., as heat, sound).
  • Examples: Friction, air resistance, viscous drag.

🔹 Work-Energy Theorem

The work-energy theorem states:

Wnet=ΔKW_{\text{net}} = \Delta K

where K=12mv2K = \tfrac{1}{2}mv^2 is the kinetic energy.

  • If only conservative forces act:

    ΔK+ΔU=0⇒E=K+U=constant\Delta K + \Delta U = 0 \quad \Rightarrow \quad E = K + U = \text{constant}
  • If non-conservative forces (like friction) are present:

    ΔK+ΔU=Wnc\Delta K + \Delta U = W_{\text{nc}}

🔹 Equilibrium and Stability

A system is in equilibrium if the net force (or net torque) is zero.
The nature of equilibrium depends on the behavior of potential energy near the point.

1. Stable Equilibrium

  • A small displacement increases UU.

  • System tends to return to equilibrium.

  • Condition:

    dUdx=0,d2Udx2>0\frac{dU}{dx} = 0, \quad \frac{d^2U}{dx^2} > 0
  • Example: Pendulum at its lowest point.

2. Unstable Equilibrium

  • A small displacement decreases UU.

  • System moves further away.

  • Condition:

    dUdx=0,d2Udx2<0\frac{dU}{dx} = 0, \quad \frac{d^2U}{dx^2} < 0
  • Example: Inverted pendulum at the top.

3. Neutral Equilibrium

  • Small displacement leaves UU unchanged.

  • Condition:

    dUdx=0,d2Udx2=0\frac{dU}{dx} = 0, \quad \frac{d^2U}{dx^2} = 0
  • Example: Ball on a perfectly flat surface.


🔹 Small Oscillations Analysis

When a system is displaced slightly from stable equilibrium, it undergoes small oscillations.

  1. Expand potential energy around equilibrium (x0x_0):

    U(x)≈U(x0)+12k(x−x0)2U(x) \approx U(x_0) + \tfrac{1}{2}k(x-x_0)^2

    where k=d2Udx2∣x0k = \left.\frac{d^2U}{dx^2}\right|_{x_0}

  2. Equation of motion:

    mx¨+k(x−x0)=0m\ddot{x} + k(x-x_0) = 0
  3. Solution is simple harmonic motion (SHM):

    x(t)=Acos⁡(ωt+ϕ),ω=kmx(t) = A\cos(\omega t + \phi), \quad \omega = \sqrt{\tfrac{k}{m}}

Examples:

  • Pendulum near equilibrium → small θ\theta → motion approximately SHM.
  • Spring-mass system → exact SHM.

📌 Summary Table

ConceptKey IdeaFormulaExample
Potential EnergyStored energy in position/configurationF=−∇U\mathbf{F} = -\nabla UU=mghU = mgh, U=12kx2U=\tfrac{1}{2}kx^2
Conservative ForcePath-independent, energy-conserving∮F⋅dr=0\oint \mathbf{F}\cdot d\mathbf{r}=0Gravity, spring
Non-Conservative ForcePath-dependent, dissipativeWnc≠0W_{\text{nc}} \neq 0Friction, drag
Work-Energy TheoremNet work = change in kinetic energyWnet=ΔKW_{\text{net}}=\Delta KPushing a box
Stable EquilibriumRestoring behaviord2U/dx2>0d^2U/dx^2>0Pendulum bottom
Unstable EquilibriumDiverging behaviord2U/dx2<0d^2U/dx^2<0Pendulum top
Neutral EquilibriumEnergy unchangedd2U/dx2=0d^2U/dx^2=0Ball on flat floor
Small OscillationsSHM near equilibriumω=k/m\omega=\sqrt{k/m}Spring-mass system

Practice Quiz

Test yourself with the quiz related to this article.

Start Quiz